Powerline actuator 1 channel with sensor input 53x43mm, 25mm deep, for mounting in 58-mm switch boxes.
Can be used as surge current switch or relay.
1 closing contact not floating 10A/250V AC, incandescent bulbs 2000 watt.
Sensor input 230V.
Standby loss of only 0.
5 watt.
For controlling and switching on the same place.
There are two rotary switches on the front for the address assignment: The left rotary switch determines the group address g with 16 alphabetical values from A to P.
The right rotary switch determines the element address element with 16 numerical values from 0 to 15.
Above it, there is a slider as configuration switch with positions 0, 1 and 2.
To the left of the rotary switches is a red LED indicating all activities.
There is a reset button next to it and a service pin to the right of it.
Functions as per operating instructions.
The above connection terminals are plug-in terminals for conductor cross-sections of 0.
2 mm2 up to 1.
5mm2.
This text is machine translated.