The electric hand sharpener CHAIN Sharp HHG is excellently suitable for machine sharpening of saw chains.
The chain saw sharpener from PFERD can be operated with a standard 12-volt car battery.
It is easy to use and produces uniform sharpness results thanks to the angle specifications of 25°, 30° and 35°.
Application refrence:- Adjust the height of the sharpening pin.
- Move the sharpener over the length of the grinding pin in an oscillating way.
Sharp direction away from the body.
- Make sure that the guide plate rests on the appropriate tooth roof.
- Do not sharpen above the wear limit of the saw teeth.
Safety Instructions:- CHAIN Sharp HHG 12 V is designed exclusively for use as chain saw sharpener.
Check tools before use.
The tool must be properly installed and be able to rotate freely.
Perform a test run for at least 30 seconds without load.
Do not use damaged, round or vibrating tools!- Always ensure that the guide plate is securely attached to the sharpener before use.
- Use only 12 V DC batteries (DC).
Avoid contact with battery acid.
Make sure that the circuit is protected with a 10 amp fuse.
- The Sharp HHG 12 V sharpener must be switched off (OFF) before connecting the battery.
Product advantages:- Flexible use on-site thanks to the compact design of the device.
- Easy handling thanks to sharp angle markings.
- Fast sharpening with precise and uniform sharpening results.
- Long service life due to replaceable grinding pins.
This text is machine translated.