Wireless universal actuator with replaceable antenna.
Surge current relay with 1 potential-free changeover contact 10A/250V AC, incandescent lamps 2000W, with DX technology.
Bidirectional.
Encrypted radio.
Stand-by loss of only 0.
9 watt.
If required, a radio antenna can be connected.
Series installation device for mounting on mounting rail.
Supply voltage 230V.
The wireless universal actuator combines the functions of a wireless antenna module and an actuator as a 1-channel surge current relay with DX technology.
If the supply voltage fails, the switching state is retained.
With recurring supply voltage is switched off in a defined way.
After installation, wait for the automatic short synchronization before connecting the switched consumer to the mains.
To do this, simply connect the N conductor to the clamp (N) and L to 15 (L).
This results in an additional standby loss of only 0.
1 watt.
From production week 08/16 this radio actuator can also be controlled locally with a 230V control button at the terminal.
In addition, the N conductor must also be connected to the clamp (N).
A glow lamp current is not permitted.
230V control button: Control current 0.
4mA.
Maximum parallel capacity (approx.
length) of control line 0,3µF (1000m).
Bidirectional radio and/or a repeater function can be switched on.
Every change in status and received central control telegrams are confirmed with a radio telegram for bidirectional radio communication.
This radio telegram can be taught in to other actuators, the GFVS software and in universal displays.
This text is machine translated.