Price search results for Eltako FSNT14 12V12W Rail mounted PSU DIN 1 A 12 W No. of outputs1 x Content 1 pcs
Switched PSU Stand-by loss only 0.2 watt. If the total power requirement of a Baureihe14 bus system is higher than 8W, further switching...read more
Subscribe
Switched PSU Stand-by loss only 0.
2 watt.
If the total power requirement of a Baureihe14 bus system is higher than 8W, further switching power supplies are required.
These must not be connected in parallel, but supply a group of actuators each, which are separated by a separation bridge on the FSNT14.
The delivery includes 1 separating bridge TB14 1 TE, 1 jumper 1.
5 TE and a spacer DS14.
At a load greater than 50% of the rated power and always with switched-mode power supplies and dimmers lying next to each other, a 1/2 division unit ventilation distance with the spacers DS14 is required.
This and a long jumper are included.
Efficiency 83% Stabilized output voltage ±1%, low ripple.
Short-circuit-proof.
Overload and over-temperature protection by switching off with automatic switching on after troubleshooting (auto-recovery function).
This switching power supply can also be used to create redundancy.
For this purpose, only 1 FSNT14 may be connected in parallel to the integrated power supplies in the FAM14 and FTS14KS and connected with a normal jumper.
The FSNT14 should be placed next to the last actuator in the bus for optimum load distribution.
This text is machine translated.
2 watt.
If the total power requirement of a Baureihe14 bus system is higher than 8W, further switching power supplies are required.
These must not be connected in parallel, but supply a group of actuators each, which are separated by a separation bridge on the FSNT14.
The delivery includes 1 separating bridge TB14 1 TE, 1 jumper 1.
5 TE and a spacer DS14.
At a load greater than 50% of the rated power and always with switched-mode power supplies and dimmers lying next to each other, a 1/2 division unit ventilation distance with the spacers DS14 is required.
This and a long jumper are included.
Efficiency 83% Stabilized output voltage ±1%, low ripple.
Short-circuit-proof.
Overload and over-temperature protection by switching off with automatic switching on after troubleshooting (auto-recovery function).
This switching power supply can also be used to create redundancy.
For this purpose, only 1 FSNT14 may be connected in parallel to the integrated power supplies in the FAM14 and FTS14KS and connected with a normal jumper.
The FSNT14 should be placed next to the last actuator in the bus for optimum load distribution.
This text is machine translated.